Skip to main content
Small fixes. A better home.
ENDA

Completed Fixera work

Precision Roller Blind Installation in Valby

Valby, Copenhagen

Six roller blinds of different sizes installed inside their window recesses, following remote assessment of a difficult mounting area and careful positioning across several openings.

Two precisely positioned roller blinds installed in adjacent openings in a Valby apartment
Precision Roller Blind InstallationValby, Copenhagen
Location
Valby, Copenhagen
Project type
Roller blind installation
Focus
Precision mounting
Status
Completed work

The work

The project story.

The client had six Veneta Classic roller blinds of different sizes ready for installation in a Valby apartment. The planned position was inside each window recess, fixed to the upper face of the opening.

Before Fixera took over, a DIY installation attempt had stalled at one of the windows. One hole could be drilled, while the second fixing point closer to the window was much more difficult to access and drill. Photos of almost all the openings, together with a close view of the problem area, were used for a remote assessment before the installation was confirmed.

The six blinds were installed on 25 August 2026 across window openings with different proportions. The work required careful drilling and positioning inside the recesses, where small placement errors would remain highly visible against the window frames.

The finished installation gives the apartment a consistent result across tall and wide openings while keeping each blind visually integrated with its own recess. The project demonstrates the value of careful positioning when the product itself has to sit cleanly within an existing architectural opening.

What mattered

Key details.

  1. 01

    Six Veneta Classic blinds installed

    All six client-supplied roller blinds were installed across window openings of different sizes in the apartment.

  2. 02

    Remote assessment after a DIY difficulty

    Photos of the openings and the difficult fixing area were reviewed before the installation scope and approach were confirmed.

  3. 03

    Precise inside-recess positioning

    Each blind was positioned inside its existing window recess, where alignment and placement directly affect the finished appearance.

Photographic record

From first step to finished result.

A photographic record of the work, kept in the sequence documented for this project.

Tall window recess before roller blind installation in a Valby apartment
01Before: one of the tall window recesses prepared for an inside-mounted roller blind.
Wide window opening before roller blind installation in Valby
02Before: the wide living-room opening before the roller blind was installed.
Roller blind installed inside a tall bedroom window recess in Valby
03A finished inside-recess installation in one of the tall bedroom openings.
Wide roller blind installed inside a broad living-room window recess in Valby
04The wide living-room blind installed cleanly inside the existing window recess.

Your home, your next step

Something worth doing properly?

Send a few photos, a short description and your location. You will get a clear next step based on the practical scope of the job.